Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rear View Monitor System





PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use the following procedure to troubleshoot the rear view monitor system.
* *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT AUXILIARY BATTERY VOLTAGE

(a) Measure the auxiliary battery voltage with the power switch off.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.

NEXT -- Continue to next step.

3. CHECK AND CLEAR DTCs*

(a) Refer to DTC Check/Clear of the navigation system or audio and visual system.

* Refer to DTC check/clear (Navigation system for radio and display type) Navigation System (for Radio and Display Type).

* Refer to DTC check/clear (Navigation system for navigation receiver type) Navigation System (for Navigation Receiver Type).

* Refer to DTC check/clear (Audio and visual system for radio and display type without intuitive parking assist system type) Audio And Visual System (without Intuitive Parking Assist System).

NEXT -- Continue to next step.

4. PROBLEM SYMPTOM CONFIRMATION

Result:





B -- Go to step 6
A -- Continue to next step.

5. SYMPTOM SIMULATION

NEXT -- Continue to next step.

6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM

(a) Refer to the navigation system (for Radio and display type) Problem Symptoms Table.

(b) Refer to the navigation system (for Navigation receiver type) Problem Symptoms Table.

(c) Refer to the audio and visual system (for Radio and display type without intuitive parking assist system type) Problem Symptoms Table.

Result:





B -- GO TO NAVIGATION SYSTEM (for RADIO AND DISPLAY TYPE) Problem Symptoms Table

C -- GO TO NAVIGATION SYSTEM (for NAVIGATION RECEIVER TYPE) Problem Symptoms Table

D -- GO TO AUDIO AND VISUAL SYSTEM (for RADIO AND DISPLAY TYPE WITHOUT INTUITIVE PARKING ASSIST SYSTEM) Problem Symptoms Table
A -- Continue to next step.

7. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table Problem Symptoms Table.

Result:





B -- Go to step 9
A -- Continue to next step.

8. PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

(a) Terminals of ECU Rear View Monitor System (w/o Navigation System)

NEXT -- Continue to next step.

9. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

10. CONFIRMATION TEST

NEXT -- END