Customize Parameters
THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Entry Function): CUSTOMIZE PARAMETERS
1. CUSTOMIZE SMART KEY SYSTEM (for Entry Function)
HINT
The following items can be customized.
NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Record the current settings before customizing.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Wireless Door Lock, Smart Key/Access or Warning.
(5) Select the setting by referring to the table below.
Wireless Door Lock
* *1: w/o Daytime Running Light Control
* *2: w/ Daytime Running Light Control
Smart Key/Access
* *: w/o Daytime Running Light Control
Warning
(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type))
(1) Turn the power switch on (IG).
(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below.
(c) Customizing with the multi-display (w/ Audio and Visual System (for Radio and Display Type with Intuitive Parking Assist System))
(1) Turn the power switch on (IG).
(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below.
(d) Entry unlock mode switching function (manual operation)
(1) The following entry unlock modes can be selected when using the entry unlock mode switching function.
* All door unlock mode: When the sensor of a front door outside handle assembly is touched, an entry unlock operation is performed simultaneously for all doors.
* Driver door unlock mode: When the sensor of the driver side door outside handle assembly is touched, an entry unlock operation is performed for the driver door only. If any other door handle is touched, an entry unlock operation is performed simultaneously for all doors.
(2) When customizing through manual operation:
1 Turn the power switch off.
2 Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock buttons of the electrical key transmitter sub-assembly for 5 seconds or more while the electrical key transmitter sub-assembly is in the actuation area.
3 Check the current setting.
HINT
* The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.
* The answer-back (wireless buzzer, buzzer in the combination meter assembly) operation for each mode is indicated in the table below.
4 Release the lock and unlock buttons of the electrical key transmitter sub-assembly.
5 Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock buttons of the electrical key transmitter sub-assembly for 5 seconds or more to change the mode.
HINT
Repeat the procedure as necessary to select the desired mode.
6 Unlock the doors with the wireless operation, and then open any door
(e) Entry cancel function (manual operation)
HINT
While the smart key system is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the power switch.
(1) The following functions are disabled when the smart key system is canceled.
1 Entry unlock/lock functions
2 Entry luggage compartment door open function
3 Push start function
4 Key lock-in prevention function
5 Entry warning functions
(2) When canceling the system through manual operation:
1 Make sure the following conditions are met:
* The power switch is off.
* The driver door is closed.
* The driver door is unlocked.
2 Press the unlock button of the electrical key transmitter sub-assembly.
3 Open the driver door within 5 seconds of completing the step above (driver door: close condition -> opened).
4 With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.
NOTICE:
If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.
5 Close and open the driver door twice completing the above step (driver door: open condition -> closed -> opened -> closed -> opened).
6 With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times completing the step above.
NOTICE:
If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.
7 Close and open the driver door completing the step above (driver door: open condition -> closed -> opened).
8 Close the driver door within 5 seconds of completing the above step.
9 Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart key system has been canceled.
HINT
Finish the step 5 to 7 within 30 seconds.
(3) Perform the following procedure to restore the smart key system to the active state from the canceled state.
1 Perform the procedures to cancel the smart key system again.
2 Check that the wireless buzzer sounds once (short beep) to confirm that the smart key system has been restored to the active state.
HINT
* The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
* The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.