C2176

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error
C2176/76 - Receiver Error

DESCRIPTION

The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.





INSPECTION PROCEDURE

NOTICE:
* When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
* It is necessary to perform initialization Initialization after registration Registration of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

PROCEDURE

1. CHECK DTC OUTPUT (C2176/76)

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Turn the power switch off.

(c) Turn the power switch on (IG) and check for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC C2176/76 is not output.

NG -- REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER Removal

OK -- END