C1AB7

PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB7: Blind Spot Monitor Slave Module
C1AB7 - Blind Spot Monitor Slave Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.





INSPECTION PROCEDURE

NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

PROCEDURE

1. CHECK DTC

(a) Clear the DTCs Blind Spot Monitor System.

(b) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- REPLACE BLIND SPOT MONITOR SENSOR LH Removal

OK -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting