C1300

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction
C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.





INSPECTION PROCEDURE

PROCEDURE

1. REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

(a) Replace the skid control ECU (brake booster with master cylinder assembly) Removal.

(b) Perform initialization and calibration of the linear solenoid valve Initialization.

(c) Perform zero point calibration of the yaw rate and acceleration sensor Calibration.

(d) Perform the sensor check in the Test Mode procedure Test Mode Procedure.

NEXT -- END