Disassembly
U660E AUTOMATIC TRANSAXLE: SHIFT LEVER: DISASSEMBLY
1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Remove the indicator light wire sub-assembly from the transmission floor shift assembly as shown in the illustration.
Text in Illustration
(b) Remove the position indicator bulb from the indicator light wire sub-assembly.
(c) Remove the position indicator bulb cap from the position indicator bulb.
(d) Separate the transmission control switch connector.
Text in Illustration
(e) Using a screwdriver, release the stopper.
(1) w/o Smart Key System
Text in Illustration
(2) w/ Smart Key System
Text in Illustration
(f) Using a screwdriver, disengage the locking lug of terminals, and pull the terminals out from the rear.
(1) w/o Smart Key System
(2) w/ Smart Key System
2. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Using a screwdriver, remove the shift lock control ECU sub-assembly.