Replacement

E351 MANUAL TRANSMISSION / TRANSAXLE: DIFFERENTIAL OIL SEAL: REPLACEMENT

1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. DRAIN MANUAL TRANSAXLE OIL Service and Repair

4. REMOVE FRONT DRIVE SHAFT ASSEMBLY

Removal.

5. REMOVE TRANSAXLE CASE OIL SEAL

(a) Using SST, remove the transaxle case oil seal.





SST : 09308-00010

6. REMOVE TRANSMISSION CASE OIL SEAL

(a) Using SST, remove the transmission case oil seal.





SST : 09308-00010

7. INSTALL TRANSAXLE CASE OIL SEAL

(a) Coat the lip of a new oil seal with MP grease.

(b) Using SST and a hammer, tap in the oil seal.





SST : 09608-10010

SST : 09950-70010

09951-07200

Standard depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

NOTICE:
Do not damage the oil seal lip.

8. INSTALL TRANSMISSION CASE OIL SEAL

(a) Coat the lip of a new oil seal with MP grease.

(b) Using SST and a hammer, tap in the oil seal.





SST : 09608-32010

SST : 09950-70010

09951-07200

Standard depth:

3.0 to 4.0 mm (0.1181 to 0.1575 in.)

NOTICE:
Do not damage the oil seal lip.

9. INSTALL FRONT DRIVE SHAFT ASSEMBLY

Installation.

10. ADD MANUAL TRANSAXLE OIL Service and Repair

11. INSPECT MANUAL TRANSAXLE OIL Testing and Inspection

12. INSTALL ENGINE UNDER COVER LH

13. INSTALL ENGINE UNDER COVER RH