Removal

HEATING / AIR CONDITIONING: SOLAR SENSOR: REMOVAL

1. PRECAUTION

Upper Instrument Panel

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

7. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

9. REMOVE COMBINATION METER ASSEMBLY Removal

10. REMOVE FRONT PILLAR GARNISH LH Removal

11. REMOVE FRONT PILLAR GARNISH RH Removal

12. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

13. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

14. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

15. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal

16. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal

17. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal

18. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

19. REMOVE SOLAR SENSOR

(a) Disconnect the connector.





(b) Disengage the 2 claws and remove the solar sensor.