Removal

HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

3. REMOVE STEERING WHEEL ASSEMBLY (w/o Front Spoiler)

Removal

4. REMOVE STEERING WHEEL ASSEMBLY (w/ Front Spoiler)

Removal

5. REMOVE LOWER STEERING COLUMN COVER Removal

6. REMOVE UPPER STEERING COLUMN COVER Removal

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

8. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

9. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

10. REMOVE NO. 1 SWITCH HOLE BASE (w/o Smart Key System) Removal

11. REMOVE NO. 1 SWITCH HOLE BASE (w/ Smart Key System) Removal

12. REMOVE ROOM TEMPERATURE SENSOR

(a) Disconnect the connector.





(b) Disengage the air hose.

(c) Disengage the 2 claws and remove the room temperature sensor.