Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU

(a) Connect the connector to the tire pressure warning ECU.





(b) Install the tire pressure warning ECU with the nut.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Installation

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Installation

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) Installation

6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

7. INSTALL FRONT DOOR SCUFF PLATE RH Installation

8. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. REGISTER TRANSMITTER ID

HINT
Registration

10. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure

11. INITIALIZE SYSTEM

NOTICE:
* Be sure to register the transmitter IDs of all tires in the ECU before initialization.
* Be sure to inflate all tires to the proper inflation pressure before initialization.

HINT
Initialization