Installation

2AZ-FXE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CAMSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring of the sensor.





NOTICE:
Make sure that the O-ring is not cracked or jammed when installing it.

(b) Install the camshaft position sensor with the bolt.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(c) Connect the camshaft position sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Removal

4. INSTALL AIR CLEANER INLET ASSEMBLY Installation

5. INSPECT FOR OIL LEAK

6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation