Installation

NAVIGATION: MULTI-DISPLAY: INSTALLATION

1. INSTALL NAVIGATION RECEIVER ASSEMBLY

(a) Install the navigation receiver assembly as shown in the illustration.





2. INSTALL RADIO NO. 2 BRACKET

(a) Install the radio No. 2 bracket with the 5 bolts.





3. INSTALL RADIO NO. 1 BRACKET

(a) Install the radio No. 1 bracket with the 5 bolts.





4. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 clips.





(c) Install the navigation receiver with heater control panel assembly with the 4 bolts.

5. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMC Made) Installation

6. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMMK Made) Installation

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made) Installation

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made) Installation

9. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMC Made) Installation

10. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMMK Made) Installation

11. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMC Made) Installation

12. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMMK Made) Installation

13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Installation

14. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Installation

15. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Installation

16. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Installation

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for TMC Made) Installation

18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for TMMK Made) Installation

19. INSERT MAP DISC