Removal

2GR-FE STARTING: STARTER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE INLET NO. 2 AIR CLEANER Removal

5. REMOVE BATTERY Removal

6. REMOVE INLET NO. 1 AIR CLEANER Removal

7. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Remove the terminal cap.

(c) Remove the nut and disconnect the starter wire.

(d) Remove the 2 bolts and starter.