Removal

2GR-FE ENGINE CONTROL: VACUUM SWITCHING VALVE (for Engine Mounting): REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE NO. 2 ENGINE UNDER COVER

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE NO. 2 AIR CLEANER INLET Removal

7. REMOVE BATTERY Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. REMOVE DUTY VACUUM SWITCHING VALVE

(a) Disconnect the duty vacuum switching valve connector and the clamp.

(b) Disconnect the 3 vacuum hoses from the duty vacuum switching valve.