Installation

1AR-FE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Attach the 2 claws to install the engine switch.





2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

(a) Connect the connector.





(b) Engage the 4 claws to install the lower instrument panel finish panel assembly.

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation

4. INSTALL UPPER STEERING COLUMN COVER Installation

5. INSTALL LOWER STEERING COLUMN COVER Installation

6. INSTALL CONSOLE BOX SUB-ASSEMBLY Installation

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

11. INSTALL FRONT DOOR SCUFF PLATE RH Installation

12. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation

13. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

14. INSTALL FRONT DOOR SCUFF PLATE LH Installation

15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

16. INSTALL CONSOLE BOX ASSEMBLY Installation

17. INSTALL NO. 2 CONSOLE BOX CARPET Installation

18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Installation

19. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.