Installation

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY

(a) Insert the front end of the front door outside handle assembly into the front door outside handle frame.





(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame, then slide the front door outside handle assembly toward the front of the vehicle to install it.

(c) Move the lever back in the direction indicated by the arrow in the illustration to lock the door outside handle assembly.





(d) Connect the connector.





(e) Engage the 2 claws.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) Reassembly

4. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Reassembly

5. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly

6. INSTALL DOOR SIDE AIRBAG SENSOR Removal

7. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY Reassembly

8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

9. INSTALL COURTESY LIGHT ASSEMBLY Installation

10. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly

11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Installation

12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INITIALIZE POWER WINDOW CONTROL SYSTEM

Programming and Relearning

15. INSPECT SRS WARNING LIGHT

Diagnosis System