Removal

POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET: REMOVAL

1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal

4. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal

6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal

7. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal

8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

9. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY

(a) Disconnect the connector.





(b) Separate part of the No. 1 console box silencer pad to allow the wire harness to be removed.





HINT
The separated part of the No. 1 console box silencer pad will be reattached during installation.

(c) Using a screwdriver, disengage the claw and remove the center power outlet socket assembly.





10. REMOVE CENTER POWER OUTLET SOCKET COVER

(a) Disengage the 2 claws and remove the center power outlet socket cover.