Timing Cover: Specifications

TIMING CHAIN COVER SUB-ASSEMBLY

Temporarily install the timing chain cover with the 17 bolts and 2 nuts.






Bolt Length:






Make sure there is no oil on the bolts. If oil is found on any bolt, clean it before installation.

Tighten the 17 bolts and 2 nuts in several steps, in the sequence shown in the illustration.






for bolt 1, 2, 3 and 4 - Torque 55 Nm (561 kgf-cm, 41 ft-lbf)

except bolt 1, 2, 3 and 4 - Torque 21 Nm (214 kgf-cm, 16 ft-lbf)

NO. 2 TIMING CHAIN COVER

Install the No. 2 timing chain cover with the 2 bolts.






Torque 10 Nm (102 kgf-cm, 7 ft-lbf)