Skid Control Sensor

BRAKE CONTROL: SKID CONTROL SENSOR: INSPECTION

1. INSPECT SKID CONTROL SENSOR

(a) Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:

* The surface of the skid control sensor is cracked, dented, or chipped off.

* The connector is scratched, cracked, or damaged.

* The skid control sensor has been dropped.

(b) Measure the resistance according to the value(s) in the table below.





Standard resistance:

LH:

Standard resistance:

RH:

(c) If the value is not as specified, replace the skid control sensor.