Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 pins and install the steering pad switch assembly.





(b) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Engage the 2 pins and install the steering pad switch assembly.





(d) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(e) Connect the connector to the spiral cable.

2. INSTALL STEERING PAD Installation

3. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation

4. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSPECT SRS WARNING LIGHT

Diagnosis System

7. PERFORM INITIALIZATION

Repair Instruction - Initialization