P0C30

P311 HYBRID VEHICLE CONTROL: HYBRID CONTROL SYSTEM: P0C30-390: Hybrid Battery Pack State of Charge High
P0C30-390 - Hybrid Battery Pack State of Charge High

DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and detects malfunctions.





INSPECTION PROCEDURE

CAUTION:
- Before inspecting the high-voltage system or disconnecting the low voltage connector of the inverter with converter assembly, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
- After disconnecting the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals. After waiting for 10 minutes, check the voltage at the terminals in the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.
HINT
Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.

PROCEDURE

1. CHECK FREEZE FRAME DATA

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.

(d) Read the output DTCs.

(e) Read the freeze frame data of P0C30-390.

Result:





B -- REPLACE HYBRID VEHICLE CONTROL ECU
A -- Continue to next step.

2. CHECK DTC OUTPUT (HV)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.

(d) Check if DTCs are output.

Result:





B -- GO TO DTC CHART Hybrid Control System

A -- REPLACE HYBRID VEHICLE CONTROL ECU Components

3. REPLACE HYBRID VEHICLE CONTROL ECU

(a) Replace the hybrid vehicle control ECU Components.

NEXT -- Continue to next step.

4. REPLACE HV BATTERY

(a) Replace the HV battery Components.

NEXT -- Continue to next step.

5. REPLACE BATTERY SMART UNIT

(a) Replace the battery smart unit Components.

NEXT -- COMPLETED