Inspection

TIRE AND WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION

1. INSPECT TIRE

(a) Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure:

(b) Using a dial indicator, check the tire runout.





Tire runout:

1.4 mm (0.055 in.) or less

2. ROTATE TIRES

(a) Rotate the tires as shown in the illustration.





3. INSPECT WHEEL BALANCE

(a) Check and adjust the off-the-car balance.





(b) If necessary, check and adjust the on-the-car balance.

Imbalance after adjustment:

8.0 g (0.018 lb) or less

4. INSPECT FRONT AXLE HUB BEARING LOOSENESS



5. INSPECT REAR AXLE HUB BEARING LOOSENESS



6. INSPECT FRONT AXLE HUB RUNOUT



7. INSPECT REAR AXLE HUB RUNOUT