Removal

AIR CONDITIONING: BLOWER UNIT: REMOVAL

HINT
* Installation is in the reverse order of removal.
* COMPONENTS for instrument panel safety pad sub-assembly: Components.
1. DISCONNECT BATTERY NEGATIVE TERMINAL

(a) Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH Removal

3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH Removal

4. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK Removal

6. REMOVE COWL VENTILATOR PANEL SUB-ASSEMBLY

HINT
Removal

7. DISCHARGE FROM REFRIGERATION SYSTEM Service and Repair

8. DISCONNECT SUCTION HOSE SUB-ASSEMBLY Removal

9. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY Removal

10. DISCONNECT HEATER WATER HOSE OUTLET A Removal

11. DISCONNECT HEATER WATER HOSE INLET A Removal

12. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal

13. REMOVE AIR DUCT SUB-ASSEMBLY NO.1 Removal

14. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY Removal

15. REMOVE STEERING COLUMN ASSEMBLY Removal

16. REMOVE HEATER TO REGISTER DUCT NO.2 Removal

17. REMOVE HEATER TO REGISTER DUCT ASSEMBLY NO.6 Removal

18. REMOVE CONSOLE BOX DUCT NO.1 Removal

19. REMOVE FLOOR CARPET BRACKET LH Removal

20. REMOVE FLOOR CARPET BRACKET RH Removal

21. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY Removal

22. REMOVE AIR DUCT SUB-ASSEMBLY NO.2 Disassembly

23. REMOVE BLOWER ASSEMBLY

(a) Remove the connector and clamp, and disconnect the wire harness.





(b) Remove the 6 screws and then the blower assembly with the cooler evaporator sub-assembly.