Reassembly

AIR CONDITIONING: BLOWER UNIT: REASSEMBLY

1. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY NO.1

(a) sufficiently apply compressor oil (ND-OIL 8) to 2 new O-rings and the fitting surface. Install the 2 O-rings to the cooler evaporator No.1.





Compressor oil:

ND-OIL 8 or equivalent

2. INSTALL COOLER EXPANSION VALVE

(a) Using a hexagon wrench 4 mm, install the cooler expansion valve with the 2 hexagon bolts.





Torque : 3.5 Nm (35 kgf-cm, 30 in-lbf)

3. INSTALL EVAPORATOR TEMPERATURE SENSOR

(a) If using a mew evaporator:





(b) Install the sensor to the evaporator as shown in the illustration.

(c) If reusing the evaporator:





(1) Install the sensor to the evaporator as shown in the illustration.

HINT
Completely cover the tube with the grommet.