Disassembly

AIR CONDITIONING: BLOWER UNIT: DISASSEMBLY

1. REMOVE EVAPORATOR TEMPERATURE SENSOR

(a) Remove the clamp and evaporator temperature sensor.





2. REMOVE COOLER EXPANSION VALVE

(a) Using a hexagon wrench 4 mm, remove the 2 hexagon bolts and cooler expansion valve.





3. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY NO.1

(a) Remove the cooler evaporator sub-assembly No.1.





(b) Remove the 2 O-rings from the cooler evaporator sub-assembly No.1.





4. REMOVE AIR FILTER COVER PLATE

(a) Release the 2 claws and remove the air filter cover plate.





5. REMOVE CLEAN AIR FILTER

(a) Remove the clean air filter.





6. REMOVE AIR INLET SERVO MOTOR

(a) Remove the 3 screws and air inlet servo motor.





7. REMOVE AIR DUCT SUB-ASSEMBLY NO.3

(a) Disengage the 4 claws and then remove the air duct sub-assembly No.3.





8. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY

(a) Remove the 3 screws and cooling unit motor sub-assembly w/ fan.