Installation

EXTERIOR: NAME PLATE: INSTALLATION

HINT
When installing a new name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:





NOTICE:
Do not heat the vehicle body and name plate excessively.

1. INSTALL BACK DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install a new name plate.

(1) Using a heat light, heat the vehicle body and a new name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate as shown in the illustration.





2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install a new name plate.

(1) Using a heat light, heat the vehicle body and a new name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate as shown in the illustration.





Standard measurement:





3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install a new name plate.

(1) Using a heat light, heat the vehicle body and a new name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate as shown in the illustration.

for XL plate:





Standard measurement:





(3) for XLS plate:





Standard measurement:





(3) for LIMITED plate:





Standard measurement:





(3) for TOURING plate:





Standard measurement:





4. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Remove the back-up light assemblies LH and RH.

(b) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(c) Install a new name plate.

(1) Using a heat light, heat the vehicle body and a new name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate as shown in the illustration.





Standard measurement:





(d) Install the back-up light assemblies LH and RH.