Disassembly

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR: DISASSEMBLY

HINT
* The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - How To Determine Nut Strength.
1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

(a) Using a clip remover, remove the 7 clips (A).





(b) Disengage the 6 clips (B) and remove the luggage compartment door cover.

2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Disengage the 2 claws and remove the cover.





(b) Disconnect the connector and control cable.

(c) Remove the 2 bolts and the luggage compartment door lock assembly.





3. REMOVE LUGGAGE COMPARTMENT DOOR HANDLE INSIDE

4. REMOVE REAR DOOR LOCK

5. REMOVE REAR DOOR LOCK