Dome Lamp: Testing and Inspection

LIGHTING: ROOM LIGHT ASSEMBLY (for Coupe):

INSPECTION

1. ROOM LIGHT ASSEMBLY NO.1





(a) Measure the resistance according to the value(s) in the table below.
Resistance:





(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, then check that the light comes on when the switch is in the DOOR position.
OK:
Light comes on.
(c) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the light comes on when the switch is in the ON position.
OK:
Light comes on.