Initial Inspection and Diagnostic Overview

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (for Coupe):

HOW TO PROCEED WITH TROUBLESHOOTING

HINT: Use these procedures to troubleshoot the power window control system (coupe).

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
NEXT -- Continue to next step.
3. PROBLEM SYMPTOMS TABLE

HINT: (Problem Symptoms Table)

(a) If the fault is not listed on the problem symptoms table, proceed to A.
(b) If the fault is listed on the problem symptoms table, proceed to B.
B -- Go to step 5
A -- Continue to next step.
4. OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Terminals of ECU (Pinout Values and Diagnostic Parameters)

(b) On-vehicle Inspection (On-Vehicle Inspection)

(c) Inspection (Inspection)

NEXT -- Continue to next step.
5. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
6. RESET POWER WINDOW REGULATOR MOTOR
(a) If the AUTO switch (driver side switch) light of the power window regulator master switch is blinking after the repair, reset the power window motor (Programming and Relearning).
NEXT -- Continue to next step.
7. CONFIRMATION TEST
NEXT -- END