Camshaft Bearing

INSTALL CAMSHAFT





Examine the front marks and numbers of the 5 bearing caps and install them. Then install the 10 bearing cap bolts. Uniformly tighten the bolts in the sequence shown in the illustration.
Bearing cap No.1 - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
Bearing cap No.3 - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)

NO.2 CAMSHAFT





Examine the front marks and numbers of the 5 bearing caps and install them. Then install the 10 bearing cap bolts. Uniformly tighten the bolts in the sequence shown in the illustration.
Bearing cap No.2 - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
Bearing cap No.3 - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)