Installation

WIPER AND WASHER: REAR WIPER RUBBER:

COMPONENTS





INSTALLATION

1. INSTALL REAR WIPER RUBBER





(a) Install the 2 wiper rubber backing plates to the rear wiper rubber.

NOTE: Be careful to observe and keep direction of curvature for correct replacement.





(b) Insert the rear wiper rubber from the claw of the middle of the rear wiper blade into the rear end position.





(c) After passing the rear wiper rubber through the rear end side claw, protrude it from the rear end stopper and pass it through the front tip side claw.
2. INSTALL REAR WIPER BLADE