Planetary Ring Gear

A246E AUTOMATIC TRANSAXLE: PLANETARY RING GEAR:

INSPECTION

1. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY





(a) Using a dial indicator, measure the inside diameter of the planetary sun gear sub-assembly.
Standard inside diameter:
22.025 to 22.046 mm (0.86712 to 0.86795 in.)
Maximum diameter:
22.096 mm (0.86992 in.)
2. INSPECT FRONT PLANETARY RING GEAR FLANGE SUB-ASSEMBLY





(a) Using a dial indicator, measure the inside diameter of the front planetary ring gear flange sub-assembly bushing.
Standard inside diameter:
19.025 to 19.050 mm (0.74901 to 0.75000 in.)

HINT: If the inside diameter is greater than maximum, replace the front planetary ring gear flange sub-assembly.