Reassembly

A246E AUTOMATIC TRANSAXLE: FLOOR SHIFT ASSEMBLY:

COMPONENTS









REASSEMBLY

1. INSTALL SHIFT LOCK SOLENOID





(a) Install the shift lock solenoid to the shift lever plate.
2. INSTALL SHIFT LOCK CONTROL ECU





(a) Connect the shift lock solenoid connector to the shift lock control ECU.
(b) Install the shift lock control ECU with the screw.
3. INSTALL SHIFT LOCK RELEASE BUTTON





(a) Apply MP grease to the spring.
(b) Install the shift lock release button and spring.
4. INSTALL POSITION INDICATOR SLIDE COVER





(a) Install the position indicator slide cover to the position indicator housing lower.
5. INSTALL CONTROL POSITION INDICATOR PLATE





(a) Install the position indicator plate to the position indicator housing upper.
6. INSTALL SHIFT LOCK RELEASE BUTTON COVER





(a) Install the shift lock release button cover.
7. INSTALL POSITION INDICATOR HOUSING UPPER





(a) Install the position indicator housing upper to the position indicator housing lower.

HINT: Fit the claws securely.

8. INSTALL POSITION INDICATOR HOUSING LOWER





(a) Install the position indicator housing lower with the position indicator housing upper to the shift lever plate.

HINT: Fit the claws securely.

9. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY





(a) Install the indicator light wire sub-assembly to the position indicator housing lower.
10. INSTALL TRANSMISSION CONTROL SWITCH





(a) Insert the wire harness into the shift lever knob from the part shown by the arrow, and install the transmission control switch to the shift lever knob.
11. INSTALL POSITION INDICATOR SLIDE COVER





(a) Install the position indicator slide cover No. 2 to the shift lever knob.
12. INSTALL SHIFT LEVER KNOB BUTTON





(a) Apply MP grease to the spring and shift lever knob button.
(b) Install the spring and shift lever knob button to the shift lever knob.
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY





(a) Install the shift lever knob with the 2 screws.





(b) Connect the 2 wire harness of transmission control switch to the connector of indicator light wire.





(c) Install the wire harness with a new push nut to the shift lever plate as shown in the illustration.
(d) Connect the indicator light wire connector to the shift lever plate.