Reassembly

A246E AUTOMATIC TRANSAXLE: ONE-WAY CLUTCH: REASSEMBLY

REASSEMBLY

1. INSTALL 1 WAY CLUTCH NO.2





(a) Install the 1 way clutch No. 2 into the 1 way clutch outer race, facing the flange side of the 1 way clutch No. 2 toward the shiny side of the 1 way clutch outer race.
2. INSTALL 1 WAY CLUTCH NO.2 HOLE SNAP RING





(a) Using a screwdriver, install the 2 1 way clutch No. 2 hole snap rings to the 1 way clutch outer race.
3. INSTALL 1 WAY CLUTCH OUTER RACE HOLE SNAP RING
(a) Using a screwdriver, install the 1 way clutch No. 2 hole snap ring to the 1 way clutch outer race.
4. INSTALL REAR PLANETARY GEAR ASSEMBLY





(a) Install the rear planetary gear assembly in to the 1 way clutch No. 2, facing the inner race of the planetary gear toward the back side of the 1 way clutch outer race.
5. INSPECT 1 WAY CLUTCH NO.2 (One-Way Clutch)