Installation

A246E AUTOMATIC TRANSAXLE: FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY:

COMPONENTS













INSTALLATION

1. INSTALL FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY
(a) Turn the ignition switch ACC or ON.





(b) Connect the cable to the upper bracket.





(c) Connect the cable clamp.
(d) Shift the shift lever to N position.





(e) Using a screwdriver, unlock the claw of the lock key of automatic adjustment part.





(f) Pass the parking lock cable through the hole of shift lever plate.
(g) Insert the slide cap into the shift lever plate.





(h) Apply MP grease to the shift lock release link.
(i) Insert the lever pin into the hole in the cable end.





(j) Lock the lock key.

HINT: At this time, the shift lever should be in N position and the ignition key should be set to ACC or ON.

2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER

HINT: (Installation)

3. INSTALL INSTRUMENT PANEL BOX

HINT: (Installation)

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CTR

HINT: (Installation)

5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

HINT: (Installation)

6. INSTALL STEERING COLUMN COVER (Installation)

7. CHECK KEY INTERLOCK OPERATION

HINT: (Testing and Inspection)