Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

COMPONENTS





REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Removal)

3. REMOVE TIRE PRESSURE WARNING RESET SWITCH





(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.

HINT: To remove the tire pressure warning reset switch, push it out with your fingers from behind as shown in the illustration.





(b) Disconnect the connector and remove the tire pressure warning reset switch.