Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR:

COMPONENTS






REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (Service Precautions).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

4. REMOVE REAR DOOR SCUFF PLATE LH (Removal)

5. REMOVE FRONT DOOR OPENING TRIM LH
6. REMOVE REAR DOOR OPENING TRIM LH
7. REMOVE CENTER PILLAR GARNISH LOWER LH (Removal)

8. REMOVE FRONT SEAT OUTER BELT ASSEMBLY (Removal)

9. REMOVE SIDE AIRBAG SENSOR LH
(a) Disconnect the connector from the side airbag sensor LH.





(b) Remove the nut and the side airbag sensor LH.