Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna):

COMPONENTS





INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY





(a) Connect the connector.





(b) Install the tire pressure warning receiver assembly with the bolt.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)

HINT: Engage the 2 tabs into the holes as shown in the illustration to install the tire pressure warning receiver assembly.

2. INSTALL ROOF HEADLINING ASSEMBLY
HINT: (Installation).

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (Test Mode Procedure).