Installation

1ZZ-FE ENGINE CONTROL SYSTEM: ECM:

COMPONENTS









INSTALLATION

1. INSTALL ECM BRACKET NO. 3 (for DENSO Made)





(a) Install the ECM bracket No. 3 with the 2 screws.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
2. INSTALL ECM BRACKET NO. 2 (for DENSO Made)





(a) Install the ECM bracket No. 2 with the 2 screws.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
3. INSTALL ECM BRACKET NO. 1 (for DENSO Made)





(a) Install the ECM bracket No. 1 with the 2 screws.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
4. INSTALL ECM BRACKET NO. 1 (for DELCO Made)





(a) Install the ECM bracket No. 1 with the 4 screws.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
5. INSTALL ECM COVER
(a) Install a new ECM cover onto the ECM as shown in the illustration.





6. INSTALL ECM





(a) Install the ECM with the 2 screws.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)





(b) Connect the 4 ECM connectors [B].
(c) Install the wire harness clamp [C].





(d) Install the cover with the 2 clips.
7. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
8. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
9. REGISTRATION VIN

HINT:
- (Programming and Relearning)