Removal

1ZZ-FE LUBRICATION: OIL PUMP:

COMPONENTS






















REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT WHEEL RH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE CYLINDER HEAD COVER NO.2 (Removal)

5. DRAIN ENGINE OIL (Service and Repair)

6. DRAIN ENGINE COOLANT (Testing and Inspection)

7. REMOVE FAN AND GENERATOR V BELT (Removal)

8. REMOVE VANE PUMP ASSEMBLY (Removal)

9. REMOVE GENERATOR ASSEMBLY (Removal)

10. REMOVE ENGINE MOUNTING INSULATOR RH (Removal)

11. REMOVE IGNITION COIL ASSEMBLY (Removal)

12. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY (Removal)

13. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY (Removal)

14. REMOVE ENGINE MOUNTING BRACKET RH (Removal)

15. REMOVE WATER PUMP ASSEMBLY (Removal)

16. SEPARATE CRANKSHAFT POSITION SENSOR (Removal)

17. SET NO. 1 CYLINDER TO TDC / COMPRESSION (Removal)

18. REMOVE CRANKSHAFT PULLEY (Removal)

19. REMOVE CHAIN TENSIONER ASSEMBLY NO.1 (Removal)

20. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY (Removal)

21. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL (Removal)

22. REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1 (Removal)

23. REMOVE CHAIN TENSIONER SLIPPER (Removal)

24. REMOVE CHAIN SUB-ASSEMBLY (Removal)

25. REMOVE CHAIN VIBRATION DAMPER NO.1





(a) Remove the 2 bolts and chain vibration damper.
26. REMOVE OIL PUMP ASSEMBLY





(a) Remove the 5 bolts, then remove the oil pump.





(b) Remove the gasket from the cylinder block.