Disassembly

1ZZ-FE ENGINE MECHANICAL: CYLINDER HEAD:

COMPONENTS

























DISASSEMBLY

1. REMOVE W/HEAD TAPER SCREW PLUG NO.2





(a) Using a socket hexagon wench 10 mm, remove the taper screw plug and gasket.
2. REMOVE VALVE LIFTER





(a) Remove the 16 valve lifters from the cylinder head.
3. REMOVE VALVE

HINT: Remove all the valves from the cylinder head in accordance with the procedure below.





(a) Place the cylinder head on wooden blocks.
(b) Using SST, compress the spring, then remove the 2 retainer locks.
SST: 09202-70020
09202-00010
09202-01010
09202-01020
(c) Remove the retainer, spring and valve from the cylinder head.
4. REMOVE VALVE STEM OIL O SEAL OR RING





(a) Using needle-nose pliers, remove the 16 oil seals.
5. REMOVE VALVE SPRING SEAT





(a) Using a compressed air and a magnetic finger, remove the 16 spring seats.
6. REMOVE STUD BOLT
(a) Using "TORX" socket wrenches E5 and E7, remove the 11 stud bolts.