How to Proceed With Troubleshooting

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:

HOW TO PROCEED WITH TROUBLESHOOTING

*: Use Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA*
NEXT -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION
-- SYMPTOM DOES NOT OCCUR: GO TO STEP 5
-- SYMPTOM OCCURS: GO TO STEP 6
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. DTC CHECK*
-- THERE IS NO OUTPUT: GO TO STEP 7
-- THERE IS OUTPUT: GO TO STEP 8
7. PROBLEM SYMPTOMS TABLE
-- CHECK FOR FLUID LEAKAGE AND GO TO STEP 10
8. DTC CHART
NEXT -- Continue to next step.
9. CIRCUIT INSPECTION*
NEXT -- Continue to next step.
10. IDENTIFICATION OF PROBLEM
NEXT -- Continue to next step.
11. REPAIR
NEXT -- Continue to next step.
12. CONFIRMATION TEST*
NEXT -- END