Installation

EXTERIOR: REAR BUMPER:

COMPONENTS










INSTALLATION

1. INSTALL REAR BUMPER ARM LH
(a) Install the rear bumper arm LH with the 3 bolts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
(b) Use the same procedures described for the LH side.
2. INSTALL REAR BUMPER REINFORCEMENT NO. 5
(a) Install the 2 rear bumper reinforcements No. 5 to the rear bumper reinforcement No. 1 with the 4 clips.
3. INSTALL REAR BUMPER REINFORCEMENT NO. 1
(a) Install the rear bumper reinforcement No. 1 with the 4 nuts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
4. INSTALL BUMPER MOULDING SET BOLT NO. 1
5. INSTALL REAR SPOILER (w/ Rear Spoiler)
(a) Install the rear spoiler retainer and rear spoiler with the 3 retainers and 2 screws.
6. INSTALL REAR BUMPER SPOILER LH (w/ Rear Spoiler)
(a) Install the rear bumper spoiler LH with the 4 retainers.
7. INSTALL REAR BUMPER SPOILER RH (w/ Rear Spoiler)
(a) Install the rear bumper spoiler RH with the hook and 3 retainers.
8. INSTALL REAR BUMPER BAR REINFORCEMENT CENTER
(a) Install the rear bumper bar reinforcement to the rear bumper energy absorber.
9. INSTALL REAR BUMPER ENERGY ABSORBER
10. INSTALL REAR BUMPER COVER
(a) Install the rear bumper cover with the 2 hooks and 2 clips.
(b) Install the 8 screws and 6 nuts.
Torque: 5.5 Nm (55 kgf-cm, 47 in-lbf)
11. INSTALL DECK TRIM COVER REAR
(a) Install the deck trim cover rear with the 2 clips.
12. INSTALL DECK BOARD SUB-ASSEMBLY