Installation

C59 MANUAL TRANSAXLE: SHIFT LEVER ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FLOOR SHIFT LEVER ASSEMBLY





(a) Install the shift lever assembly with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
2. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT





(a) Connect the select cable to the retainer of shift lever assembly turn the lock.

NOTE: The projecting part of the cable outer should face upward when the shift cable is installed.

(b) Install the cable outer spring to the lock.

NOTE: Make sure that after installation the cable outer spring is moved to the place shown in the illustration.





(c) Connect the end of the select cable and install the clip to the shift lever assembly.
3. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT





(a) Connect the shift to the retainer of shift lever assembly, turn the lock.

NOTE: The projecting part of the cable outer should face upward when the shift cable is installed.

(b) Install the cable outer spring to the lock.

NOTE: Make sure that after installation the cable outer spring is moved to the place shown in the illustration.





(c) Connect the end of the shift cable and install the clip to the shift lever assembly.
4. INSTALL CONSOLE BOX SUB-ASSEMBLY REAR
5. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
6. INSTALL CONSOLE PANEL UPPER
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY