Removal

A245E AUTOMATIC TRANSAXLE: FLOOR SHIFT ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE UPPER CONSOLE PANEL (Removal)

2. REMOVE CONSOLE BOX CARPET
3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY (Removal)

4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (Removal)

5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Remove the cable end from the rod of the floor shift assembly.





(b) Using a screwdriver, disconnect the control cable from the shift lever plate.

HINT: Tape up the screwdriver tip before use.

6. DISCONNECT FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY





(a) Remove the cable end from the lever pin of the floor shift assembly.





(b) Using a screwdriver, disconnect the parking lock cable from the floor shift assembly.

HINT: Tape up the screwdriver tip before use.

7. REMOVE FLOOR SHIFT ASSEMBLY
(a) Disconnect the 2 connectors.





(b) Disconnect the 2 wire harness clamps from the shift lever assembly.
(c) Remove the 4 bolts and floor shift assembly.