Disassembly

A245E AUTOMATIC TRANSAXLE: ONE-WAY CLUTCH: DISASSEMBLY

DISASSEMBLY

1. INSPECT NO. 2 1 WAY CLUTCH (One-Way Clutch)

2. DISCONNECT REAR PLANETARY GEAR ASSEMBLY
(a) Disconnect the No. 2 1 way clutch from the rear planetary gear assembly.
3. REMOVE 1 WAY CLUTCH OUTER RACE HOLE SNAP RING





(a) Using a screwdriver, remove the 1 way clutch outer race snap ring and retainers from the 1 way clutch outer race.
4. REMOVE NO. 2 1 WAY CLUTCH HOLE SNAP RING
(a) Using a screwdriver, remove the 2 No. 2 1 way clutch hole snap rings and retainers from the 1 way clutch outer race.
5. REMOVE NO. 2 1 WAY CLUTCH





(a) Remove the No. 2 1 way clutch from the 1 way clutch outer race.