Camshaft Bearing Cap Torque

CAMSHAFT BEARING CAP TORQUE





Examine the front marks and numbers and check that the sequence order is as shown in the illustration. Then tighten the bolts.

Bearing cap No. 1 - Torque: 23 Nm (235 kg-cm, 17 ft-lb)
Bearing cap No. 3 - Torque: 13 Nm (133 kg-cm, 10 ft-lb)

- Bearing cap No. 1 is used for bearings numbered from 9 to 11 in the illustration.
- Bearing cap No. 3 is used for bearings numbered from 1 to 8 in the illustration.