Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (Removal)

3. REMOVE REAR SEATBACK ASSEMBLY LH (Disassembly)

4. REMOVE REAR DOOR SCUFF PLATE LH
5. REMOVE ROOM PARTITION BOARD LH (Removal)

6. REMOVE INNER ROOF SIDE GARNISH LH
7. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY





(a) Remove the bolt.





(b) Disconnect the connector and remove the tire pressure warning receiver assembly.