Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT PROTECTOR RETAINER UPPER

HINT: When only the installation part of the headlight assembly LH is damaged, it can be repaired inexpensively by using a headlight protector retainer UPR. In this case, however, the headlight assembly itself should not be damaged.





(a) Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part roughly, place the headlight protector retainer UPR LH against the bosses and gradually file any interfering part until the proper condition for installation is made.





(b) Install the headlight protector retainer UPR LH with 2 screws.
2. INSTALL HEADLIGHT PROTECTOR RETAINER LWR





(a) Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part roughly, place the headlight protector retainer LWR LH against the bosses and gradually file any interfering part until the proper condition for installation is made.





(b) Install the headlight protector retainer LWR LH with a screw.