Installation

EXTERIOR: OUTSIDE MOULDING: INSTALLATION

INSTALLATION

1. INSTALL OUTSIDE MOULDING
(a) Using a heat light, heat the body.
Heating temperature:
40 to 60°C (104 to 140°F)

NOTE: Do not heat the body excessively.

(b) Remove the double-sided tape from the body.
(c) Wipe off the stains with cleaner.
(d) Clean the moulding (if reusing).
(1) Using a heat light, heat the moulding.
Heating temperature:
20 to 30°C (68 to 86°F)

NOTE: Do not heat the moulding excessively.

(2) Remove the double-sided tape from the moulding.
(3) Wipe off the stains with cleaner.
(4) Apply new double-sided tape to the moulding as shown in the illustration.





(e) Using a heat light, heat the body and moulding.
Heating temperature:





NOTE: Do not heat the body and moulding excessively.

(f) Remove the peeling paper from the double-sided tape on the moulding face.

NOTE: When the peeling paper is removed, take care that no dirt or dust contaminates the adhesive.

(g) Affix the moulding to the body, as shown in the illustration.





NOTE: Do not apply excessive force onto the moulding. Use steady pressure with your thumbs.